FEATURES - Hide
SIMPLICITY
- User friendly setup and configuration
- Hand crank to raise signal head
- Adjustable sign head height for parking garage applications
QUALITY
- Manufactured in an ISO certified facility
- 1 year factory warranty
PERFORMANCE
- Compact & light weight; perfect for urban areas and parking garages
- Sets up in 2 minutes
RELIABILITY
- Tested in various climates around the world
- Up to 100 hours of operation with batteries
- Built-in auxiliary charger allows for continuous operation
+ SPECIFICATIONS Show
Dimensions:
L= 41”
W= 23”
H= 80” (travel)
156” (operating)
Controller
- PLC Board components meet the highest industrial standards and are assembled using the latest “surface mount” technology for 100 percent accuracy and reliability
- LCD screen has user friendly input buttons to switch to different modes.
- Modes of Operation
- Automatic Operation
- Manual mode w/ radio
- Manual mode with 2 units and radio remote
- Battery Voltage is displayed on the LCD screen and updated every second
- Simple user interface allows for easy setup of device. Preset distance-based time cycles make automatic mode allows for quick setup.
Controller Features
- Controller menu displays the following:
- Signal status
- Battery voltage
- Actuation status
- Radio communication
- System Faults
- Actuation inputs for microwave sensors or loop detection
- User configurable Red, Amber, Green timing
- Six selectable radio channels
- Hardwire communication connection capable
- GPS/Cellular response unit provides text message in the event of a fault and allows user to access a web based application to determine location of unit
- Audible low battery alarm sounds when voltage drops below predefined limit.
- Audible feedback when buttons are pushed
Wiring
- Wires meet applicable SAE, UL and ITE standards.
- Wire connectors meet standards for applicable UL standards.
- Terminal blocks are coated to prevent corrosion
Power Supply
- Two (2) six Volt deep cycle batteries with 220 amp hours of storage each
- 12 Volt power system
- Batteries housed in a lockable steel cabinet with rollout drawer
- Batteries secured with steel lockdowns
- Able to operate for 2 solid days before charging is required
Radio Transmitters
- Radio transmitters are rated to operate in environments up to 90% humidity in temperatures ranging from -40 to +85 C
- Radio has spread spectrum frequency hopping with 10 available patterns to reduce interference.
- Radio components are certified as compliant with FCC (Part 15, Subpart C, Section 15.247 Frequency Hopping Spread Spectrum Operating in 902-928 MHz Band)
LED signals
- Signal is comprised of Light Emitting Diodes (LED)
- LED signals are 8” in diameter
- Signals are 12Volt and comply with ITE standards
- LED signals are certified as compliant with FCC (47 CFR, Part 15:2006 15.109, Class A)
- Life expectancy of signal is 100,000 hours
- Signals are contained in an ITE certified polycarbonate housing with an aluminum backboard
- Visors extend over each signal by 7 inches
- 4” amber LED beacon mounted on rear of signal head provides status of signal by flashing when the signal is green and staying solid when the signal is red.
Radio Remote Control
- Weighs less the 0.5 lbs
- Powered by 4 AA batteries that last from 6-12 months
- Splash proof
- 2 seconds button delay to prevent accidental pushing
- Red LED light confirms receipt of signal upon press of button
- Radio remote control stored in a nylon pouch with belt clip and spare battery pouch
Paint and Steel Preparation
- Preparation includes phosphorus spray wash of bare steel to cleanse frame of oil and residue.
- Two coats of epoxy primer and two coats of construction orange paint are applied (alternative colors are available).
- Painting procedures comply with ASTM B117 specifications for resistance to salt air environment.
Cabinet and Signal Posts
- Welding performed and inspected by certified welders
- Solid rubber tires
- Manual winch raised signal post
+ OPTIONS Show
Hand Held Remote Control
Allows your workers to stop and start traffic at anytime with the push of a button. When your crew needs to bring a truck into the open lane they just push the Red button to stop the oncoming cars
Microwave Traffic Sensors
Improves traffic flow through the workzone by detecting vehicles and adjusting the timing based on the traffic volume
Gatearm
A highly reflective and flexible gatearm can be added to provide more positive vehicle control.
Hardwire Communication
Ensures communication between signals when used in underground parking garages.
Contact us for expert assistance with all your needs for portable traffic control systems.