FEATURES - Hide
SIMPLICITY
- Push button control familiar to the public
- Easily integrate in any workzone
- User friendly setup and configuration
QUALITY
- Manufactured in ISO certified facility
- Heavy duty steel frame
- 1 year factory warranty
PERFORMANCE
- Tow in tandem
- High powered radio communication system
- Setup in less than 2 minutes
RELIABILITY
- Conflict monitoring ensures safe pedestrian crossings every time
- Up to 21 days of operation without sunlight
+ SPECIFICATIONS Show
Dimensions:
L= 176”
W= 61”
H= 88” (travel)
144” (operating)
Computer Components
(Controller, Malfunction Management Unit and Transfer Flasher Relay)
- Rated for temperatures of -40 C to +50 C
- Consists of a Controller with internal MMU and TFR
- The controller has a 3” x 4” backlit LCD display.
Controller Features
- Controller menu displays the following:
- Signal status
- Cycle time countdown
- Battery voltage
- Actuation status (activated by pedestrian pushbutton)
- Time of day plan
- Radio communication
- System Faults
- Cycle time adjustment based on time of day and day of week
- Seven selectable radio channels
- Hardwire communication connection capable
- GPS/Cellular response unit provides text message in the event of a fault and allows user to access a web based application to determine location of unit
- Audible low battery alarm sounds when voltage drops below predefined limit.
- Password protection
- User selectable default modes of Solid or Flash red
- Audible feedback when buttons are pushed
Wiring
- Wires meet applicable SAE, UL and ITE standards.
- Wire connectors meet standards for applicable UL standards.
- Terminal blocks are coated to prevent corrosion
Solar Panel
- 170 watt fully adjustable solar array
- Panels are welded to the mounting bracket for theft prevention
- Panel mounting bracket is secured to the trailer by way of antitheft mechanism
- Housed in anodized aluminum frame
- UL1703 certified
- Conversion efficiency is over 16%
- Manufactured under ISO9001 and ISO14001 standards
- Maximum Power 174 watts
- Tolerance +10% /-5%
- Maximum Power Voltage 17.4 Volts
- Maximum Power Current 10.04 Amps
- Open Circuit Voltage 21.7 Volts
- Short-Circuit Current 10.68 Amps
- Loss of output is 10% or less within 12 years and less than 25% within 25 years
- Solar Panel Testing and Certification
- Thermal cycle testing
- Thermal shock test
- Thermal/Freezing and high humidity cycling test
- Electrical isolation test
- Hail impact test
- Mechanical, wind and twist loading test
- Salt mist test
- Light and water-exposure test
- Field exposure test
- Solar Panel Testing and Certification
Power Supply
- 8 six Volt deep cycle batteries with 220 amp hours of storage each
- 12 Volt power system
- Batteries housed in a lockable steel box with rubber floor that can hold 8 batteries
- Batteries secured with steel lockdowns
- Able to operate 21 days without solar power
LED signals
- Signal is comprised of Light Emitting Diodes (LED)
- LED signal face is 12”
- LED Colors:
- Hand – Portland Orange
- Man – Lunar White
- Signals are 12 Volt and comply with ITE standards
- LED signals are certified as compliant with FCC
- Maintain 70% of initial lumen intensity after 50,000 hours of operation
- Signal is contained in an ITE certified polycarbonate housing
- Operating temperature of -40 to 165 F
Pedestrian Push Button
- Piezo Driven Solid State Switch
- Operating Temperature: -30°F to 165°F (-34°C to 74°C)
- Operating Voltage: 12-24V AC or DC
- Operating Life: Greater than 100 million operations
- Operating Standby Current: 10µA typical (equivalent to 2MΩ at 20V)
- Body Material: Die Cast Aluminum, Powder Coated
Radio Transmitters - 9XTend-PKG-R (RS-232/485)
- Radio transmitters are rated to operate in environments up to 90% humidity in temperatures ranging from -40 to +85 C
- Radio has spread spectrum frequency hopping with 10 available patterns to reduce interference.
- Radio components are certified as compliant with FCC (Part 15, Subpart C, Section 15.247 Frequency Hopping Spread Spectrum Operating in 902-928 MHz Band)
Paint and Steel Preparation
- Preparation includes phosphorus spray wash of bare steel to cleanse frame of oil and residue.
- Two coats of epoxy primer and two coats of construction orange paint are applied (alternative colors are available).
- Painting procedures comply with ASTM B117 specifications for resistance to salt air environment.
Trailer and Signal Posts
- Welding performed and inspected by certified welders
- Torsion bar suspension
- 13” tires
See other system options available for PTL 2.4x and RCF 3.4 signals
Contact us for expert assistance with all your needs for portable traffic control systems.